G0709 14" x 40" Gunsmith Gearhead Metal Lathe

A powerful, feature-packed lathe designed for extended production.

The G0709 14" x 40" Gunsmithing Lathe comes with features typically not found on standard lathes, such as high-precision NSK bearings, extra-large 1-9/16" spindle bore and a "spider" mount system.

The spider mount system has four brass-tipped screws that stabilize long shafting and rifle barrels through the outboard end of the spindle.

Supplied with a 2 HP motor, the 8-speed gearhead of the G0709 produces spindle speeds from 70-2000 RPM.

The tailstock lock system features a drive hub, which allows you to use a 1/2” torque wrench to clamp the tailstock in place at a pre-determined torque setting. This ensures consistent draw-down alignment every time, even with multiple lathe operators using the machine.

The G0709 features a foot brake that also acts as a safety device and can bring the machine to an instant stop.

The G0709 also comes with a D1-5 spindle, a 200 series quick change tool post, flood coolant system, LED work light, and a pull-out chip tray.

Like all Grizzly gunsmithing lathes, the G0709 comes with a 1-year warranty covering parts and assuring the unit is free from factory defects. (Consumables are not covered by the warranty.)

The G0709 manual was written by our U.S.-based Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your lathe.

The Grizzly Technical Support team is U.S.-based. Parts and accessories for the lathe may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.

SPECIFICATIONS

• Motor: 2 HP, 220V, single-phase, 10A
• Swing over bed: 14"
• Distance between centers: 40"
• Swing over saddle: 13-13/16"
• Swing over cross slide: 8-13/16"
• Spindle bore: 1.57" (40mm)
• Spindle nose taper: MT#5
• Spindle nose: D1-5 Camlock
• Spindle speeds: 8, 70-2000 RPM
• Carriage travel: 36"
• Cross slide travel: 6-11/16"
• Tailstock barrel taper: MT#3
• Tailstock barrel travel: 3-15/16"
• Footprint: 70-3/8" x 15-3/4"
• Overall dimensions: 71-1/2" L x 26-3/16" W x 52" H
• Approximate shipping weight: 1550 lbs.

FEATURES

• Spider mount system for stability
• Easy-to-use lever controls
• Hardened and ground cast-iron bed
• Cuts 4-112 Standard TPI and 0.1-7 Metric
• Cuts LH threads
• On/off reverse switch on carriage
• Socket for tailstock lock
• Cast aluminum gear cover

STANDARD EQUIPMENT

• 6" 3-Jaw chuck with reversible jaws
• 8" 4-Jaw chuck with independent jaws
• 11" face plate
• Steady rest/follow rest
• Full length splash guard
• Quick change tool post with 2 tool holders
• (2) MT#3 dead centers (1 carbide tipped)
• (1) MT#3 live center
• (1) MT#5 - MT#3 sleeve
• Pull-out chip pan
• 1/2" drill chuck w/ MT#3 arbor
• Toolbox